Mantispod 2.0

Remove the decorative cover on the front leg and the Remote Control can be magnetically fixed to the tripod; For tripod use, please refer to quick start guide. 

 

Mantis Mode can only be applied when satisfying the following requirements:
1.The hanging surface should be less than 90mm thick.
2. The other two leg must be supported . 
3. Please avoid hanging it on moving vehicles, yachts and other moving objects.

 

The claw and the other 2 legs form a three-point stable structure to ensure overall stability and safe mounting through leverage and the photographic equipment weight, thus can hold a gear of less than 2kg. 

 

It is compatible with Vlog gear that is less than 2kg, including mirrorless cameras, smartphones and action cameras. (the action camera adapter and smartphone holder need to be purchased separately in official store). 
The Remote Control is compatible with:
Sony：Alpha 7C、Alpha 7R IV、Alpha 7R III、Alpha 7S III、Alpha 9、Alpha 6600、Alpha 6100、Alpha 7 III、Alpha 7 Ⅳ 、Alpha 6400、ZV-1、DSC-RX0M2、DSC-RX100M7、FX3、ZV-E10
Canon：EOS M6 Mark II、EOS M50、EOS M50 Mark II、EOS M200、
PowerShot G5 X Mark II 、PowerShot G7 X Mark III 、EOS R、EOS R5、EOS R6
GoPro：Gopro5/6/7/8/9/10/11

 

Yes, the cold shoe mount on the side allows photographers to enhance their creativity by adding light, microphone or smartphone.


 

The maximum load capacity is 2kg. 

MantisPod 2.0 Remote Control Kit is an allround tripod with Mantis/High-angle/Low-angle/Handheld/Briefcase/Portrait Modes to satisfy diverse working needs.
The innovative Mantis claw design makes it clinch to glass, doors, trees, railings effortlessly, meeting the diverse shooting demands of vloggers and easily record close-ups and interview scenes.  The configured Remote Control allows zoom in/ zoom out/photo-taking/video-recording from a distance, making your shooting more stable and professional. MantisPod 2.0 Remote Control Kit will surely take your vlogging to the next level!

We offer 3-year warranty for tripod and 1-year warranty for Remote Control. 
 

It weighs 312g. 
 

195*42*115mm. 
 

MantisPod 2.0 Remote Control Kit inherits the quick release design of 1.0 and realizes quick (dis) connect through quick release panel. 

 

MantisPod 2.0 Remote Control Kit offers two height options when standing: 
High-angle height: 210mm; Low-angle height:  130mm

 

MantisPod 2.0 Remote Control Kit offers solid support for your gear, but it doesn't have anti-shake function. 


 

Yes, the bottom of legs use soft anti-slip material. 


 

MantisPod 2.0 Remote Control Kit is made of fiberglass reinforced nylon(mainly) and aluminum-alloy(part) to keep a balance between strength and lightness. 



 

Yes, MantisPod 2.0 Remote Control Kit has a ¼”-20 compatible attachment point on the top.



 

MantisPod 2.0 Remote Control Kit is an allround tripod designed for Vloggers, with a maximum load of 2KG. It is suggested to use this tripod to hold mirrorless cameras and card cameras. Overly heavy gear may cause the deform of tripod and thus is not recommended.
"



 

MantisPod 2.0 Remote Control Kit inherits the PGYTECH quick release design and expands the Arca-compatibility so that it can harmonize with more Arca-Swiss quick release plates. Due to the differences in the size of Arca quick-release plates from different manufacturers, the specific compatibility is subject to the actual situation.





 

We don't recommend using it in water because it is not waterproof. 





 

Long press the Video button to switch on, and press Video button 5 times to enter Bluetooth pairing. 
1)Sony cameras: Press the MENU button on the camera. Go right to Network, then select Bluetooth Settings, choose Bluetooth Function, set the setting to On, then go back to Bluetooth Settings, Choose Pairing, make sure the remote control is connected, done. 
2)Canon cameras: 
Step 1: Press the MENU button, enable Wireless Communication Settings and choose Bluetooth Function, make sure the remote control is paired, done. 
Step 2: Press the SET button, choose Driving Mode, and select Selfie: 10S/Remote Control, exit SET. 
Step 3: Before taking pictures or videos, please adjust the camera to the desired gear first.
3) GoPro: Swipe down on the screen to bring up Preferences, and tap on it. Tap on connections and choose Connect Device. Scroll down to Smart Remote and select it.





 

Because of the differences in control protocols between mobile phone  manufacturers, the PGYTECH Mantis RC M1 cannot be perfectly matched with all  brands of mobile phones for the time being, and the operation and interaction  with different brands of mobile phones may vary greatly.